Mittwoch, 12. Juni 2019

Skull tattooed with butterflies - My debut as guest designer for Visible Image

*** enthält WERBUNG / contains Advertisement ***
Jipiejayeahhhh! Juchu und heissassa, endlich kann ich Euch meine erste Karte zeigen, die ich mit den Visible Image Produkten gemacht habe. Ich bin ja eingeladen worden, als Gastdesignerin für Visible Image für drei Monate im Team mit dabei zu sein. Erst durfte ich mir ein großzügiges Paket ihrer Goodies aussuchen und das ist mittlerweile nicht nur bei mir eingetroffen (DANKE!!!!!), sondern ich war auch schon kreativ. Hier kommt mein Erstlingswerk!
Yipieyayeahhhh! Dabadoooo and strike, finally I can show you my first card I made with the Visible Image products. I was invited to be a guest designer for Visible Image for three months. First I was allowed to choose a generous package of their goodies and that has not only arrived with me in the meantime (THANK YOU!!!!!), but I was also already creative. Here comes my first piece of art!

Zunächst habe ich mal die Totenkopfschablone mit einem Bleistift skizziert, so dass ich eine Ahnung hatte, wo die Schmetterlinge zu verteilen waren. Dann habe ich die Schmetterlinge schön über die offenen Stellen verteilt. Hierzu habe ich mir die Totenkopfschablone abermals zur Hand genommen, damit ich an den Rändern den weißen Rand erhielt. Die Schablone hat ja im linken Teil einen großzügigen freien Bereich mit dem passenden Rand und daher habe ich sie quasi auf dem Kopf stehend genutzt, um die Ränder beim Stempeln der Schmetterlinge frei zu halten. Das Bild steht also nicht Kopf, wie Ihr es vielleicht erst gedacht habt. Dann habe ich die Ränder des Totenkopfs mit einem Multiliner nachgezogen. Das ergebnis könnt Ihr im Foto erkennen.
First I sketched the skull template with a pencil, so that I had an idea where the butterflies were to be distributed. Then I stamped the butterflies randomly over the open places. For this I took the skull template again, so that I got the white line at the edges. The mask has a big free area in the left part with the matching edge and so I used it upside down to keep the edges free when stamping the butterflies. The picture is not upside down as you might have thought it would be. Then I outlined the edges of the skull with a multiliner. You can see this in the photo.


Beim Kolorieren habe ich mit Copics gearbeitet. Sowohl die Schmetterlinge als auch die Hintergründe sind damit gestaltet. Habt Ihr es bemerkt? Um eine ganz besonderen Effekt zu erzielen, habe ich den Totenkopf selber am rechten Rand durchgezeichnet. Auch den ein oder anderen Strich vom Schmetterling habe ich überlappen lassen. 
I used Copics for my colouration. The butterflies as well as the backgrounds are designed with it. Have you noticed it? To achieve a very special effect, I let the skull go over the white part on the right side. I also overlapped one or the other stroke of the butterfly. 


Für die weiß gräulichen Formen habe ich mit weißer Acrylfarbe und der Fibres Schablone gearbeitet. Ich hatte schon vermutet, dass die Farbe einen leicht gräulichen Ton annehmen wird und habe dies genutzt und mit einem Signomarker weiße Strukturen an die Ränder gezeichnet. Unten an den Rändern habe ich frei Hand mit Acrylstiften gezeichnet. 
Der Schrifzug ist mit Versamark gestempelt und in weiß embosst. 
For the white greyish parts I worked with white acrylic paint and the Fibres stencil. I had already suspected that the colour would take on a slightly greyish tone and used this to draw white structures on the edges with a Signo marker. At the bottom of the image I drew free hand with acrylic pencils.
The writing is stamped with Versamark and embossed in white.



Na, was meint Ihr, möchtet Ihr mehr von dem sehen, was ich mit den Visible Image Produkten gemacht habe?
So, what do you think? Do you want to see more of what I made with the Visible Image products?


Materialliste
Supplies
Stempel / stamps: Visible Image Wings of Change
Stempelkissen / stamp pads: Versamark; Memento tuxedo black
Embossingpulver / embossing powder: Stampendous! detail white
Schablonen / stencils: Visible Image Skull Shadow, Fibres
Copics 0, 100, BG11, BG13, BG49, RV02, RV06, RV09, RV69
Copic Multiliner 0.5
Signo Marker white
Triton Marker violet red


An den folgenden Challenges möchte ich mit meiner Karte teilnehmen.
I would like to participate into the following challenges with my card.

9 Kommentare:

  1. Way cool!! I adore this! Out of the box and unique skull! You rock

    AntwortenLöschen
  2. A striking colour combination and a very clever design. Many thanks for joining in at our True Colours challenge this month at Stamping Sensations.

    AntwortenLöschen
  3. A pretty card and such a striking colour palette, thanks so much for joining in with our June theme at Stamping Sensations challenge.

    B x

    AntwortenLöschen
  4. Great card with these stamps, mask and use of colours.
    Thank you for joining at Stamping Sensations.

    AntwortenLöschen
  5. Wow... deine Karte ist großartig geworden.
    Danke für deine Teilnahme bei den Sweet Stampers.
    LG
    Kuni

    AntwortenLöschen
  6. First of all Congratulations ! Love your skull head beautifully embellished with those gorgeous pink butterfly. Beautiful design too. A fabulous showcase of the VI products. Thanks so much for sharing and for playing along at Uniko.

    AntwortenLöschen
  7. WOW! This looks so cool. Thanks for playing along with the Craft Stamper challenge xx

    AntwortenLöschen
  8. Fabelhaft gemacht!
    Danke für deine Teilnahme bei den Sweet Stampers.
    LG Dreja

    AntwortenLöschen
  9. Das ist eine wirklich tolle Karte geworden. Der Kontrast gefällt mir total gut.♥ Vielen lieben Dank für Deine Teilnahme bei unserer
    Sweet Stampers Challenge
    Bis zum nächsten Mal.
    Ganz liebe Grüße
    Angela DT

    AntwortenLöschen

Your feedback makes my day!